
Edisons range · supplied by Affordable Machinery
Baumr-AG 200L Heavy-Duty Petrol Concrete Cement Mixer, 3hp 105cc Engine
Ask us for the price and delivery time for this model.
Call 0449 531 852 / ask a questionBUILT TO MIX
The Baumr-AG CPS-200 is a 200L Petrol Concrete Mixer built for tradies, small operators, rural property owners and serious DIY users who need a practical mixer for regular concrete, cement, mortar, plaster, resin and asphalt jobs. With a 200L steel drum and petrol power, it is made for work where mains power is not always handy.
PETROL POWER
The 105cc 4-stroke single cylinder engine delivers 3.0HP, about 2250W, giving you the drive needed for site work, slab prep, post setting, paths, repairs and maintenance jobs. Recoil start, manual choke and manual throttle control keep operation simple, while forced air cooling with thermal cut off helps protect the engine during demanding use.
TOUGH BUILD
A heavy duty tubular steel frame, 10-inch rubber wheels on a steel axle, steel drum and cast iron ring gear give the CPS-200 the strength expected from commercial style gear. The drum uses a 1.5mm upper section and 1.9mm lower section to help handle heavier mixing loads, while two steel agitator blades support consistent mixing across common building materials.
CONTROLLED POURING
The GripLock foot-controlled tilt and lock system keeps both hands free for better pour control. The cast iron tip lock and geared manual tilt setup help manage heavier loads with more confidence, making it easier to place mixes where you need them.
WORK READY
With a 390mm drum mouth, 630mm drum diameter, and a practical steel frame layout, this mixer is made to be loaded, moved, tipped and cleaned with less mucking around. It suits jobsite work, property maintenance, farm use, shed projects and regular weekend building jobs.
SMART VALUE
Baumr-AG gives you commercial style capability with sensible pricing, making the CPS-200 a strong choice for buyers who want power, capacity and durability without paying over the odds.
The Baumr-AG 200L Heavy-Duty Petrol Concrete Cement Mixer is designed to boost efficiency on construction sites, delivering powerful and consistent mixing for a range of materials.
3.0HP Engine Cast Iron Gear Griplock Tilt
Worksite Tough
The CPS-200 is built from heavy-duty tubular steel with a 1.5mm upper and 1.9mm lower steel drum construction, designed to handle regular concrete, cement, mortar, plaster, resin and asphalt jobs without wearing down. Commercial-grade strength at a practical price point.
200L Drum
The 390mm drum mouth and 630mm drum diameter make loading, mixing and cleaning straightforward, with enough capacity to handle renovations, landscaping, footings, slab prep, post setting and general concreting jobs without multiple small batches.
Reliable Petrol Power
The 105cc 4-stroke single cylinder engine delivers 3.0HP with recoil start, manual choke and manual throttle control for simple, dependable operation wherever mains power is not available. Forced air cooling with thermal cut-off helps protect the engine during sustained use on demanding jobs.
Cast Iron Ring Gear
Cast iron drive and drum gears are built to outlast the steel alternatives found on lighter mixers, delivering long service life under the repeated stress of heavy mixing loads in demanding site conditions.
Replace Individual Paddles When Needed
The four-arm mixing paddle assembly removes easily for cleaning at the end of the day, and individual paddles can be replaced as needed rather than replacing the full assembly.
Multi-Position Tilt Lock
The cast iron tip lock holds the drum securely in position during mixing, pouring and clean-up, giving you rock-solid stability at every stage of the batch without the drum shifting unexpectedly.
Ready to Roll
Ten-inch rubber wheels mounted on a steel axle make it easy to reposition the CPS-200 around the worksite between batches, across uneven ground and through tight access areas without heavy lifting.
A strong choice for buyers who want power, capacity and durability without paying over the odds.
- 200L drum capacity supports larger mixing jobs
- 105cc 3.0HP 4-stroke petrol engine suits work away from mains power
- Forced air cooling with thermal cut-off helps protect the engine
- Recoil start keeps operation simple and jobsite friendly
- Manual choke gives added control during cold starts
- Manual throttle lets you manage engine speed
- Fine paper air filter helps protect the engine from dust intake
- Dry centrifugal clutch provides reliable power transfer to the drum
- Cast iron drive and drum gears improve long term durability
- 24-45 RPM drum speed supports controlled mixing
- Two steel agitator blades help produce consistent mixes
- Heavy duty tubular steel frame supports up to 180kg for heavier mixing tasks
- 10 inch rubber wheels mounted on a steel axle improve worksite mobility
- 1.5mm upper and 1.9mm lower steel drum construction suits cement, mortar and concrete mixing
- Foot controlled steel tip lock mechanism keeps both hands free for controlled pouring
- 390mm drum mouth and 630mm drum diameter make loading and mixing easier
| Product Type | Cement Mixer |
|---|---|
| Brand | Baumr-AG |
| Colour | Blue |
| Body Material | Steel - Heavy Duty |
| Motor Type | 4-Stroke |
| Power Type | Petrol |
| Engine Displacement | 105cc |
| Power (Watts) | 2250W |
| Drum Capacity | 200L |
| Drum Diameter | 630mm |
| Drum Mouth | 390mm |
| Drum Speed | 45 RPM |
| Ring Gear Type | Cast Iron |
| Product Dimensions (W x L x H) | 126 x 84 x 142 cm |
| Product Weight | 67kg |
| Carton Dimensions (W x L x H) | 75 x 79 x 65 cm |
| Carton Weight | 86kg |
| Edisons SKU | TOLCCMBM20PA |
- 1 x Baumr-AG 200L Petrol Concrete Mixer
- Note: User Manual is accessible online
Edisons publish a 12-month warranty for private household use and a 3-month warranty for commercial use, from the date of purchase. Wear parts and consumables (such as belts, blades, cables, wheels and batteries) are not covered once used. These goods also come with guarantees that cannot be excluded under the Australian Consumer Law.
Draft note: the warranty Affordable Machinery can offer as an Edisons dealer is not yet confirmed in writing.
We confirm availability and freight to your address with Edisons before we process payment, and contact you with an ETA. Freight to Tasmania is quoted per order.