
Fitment and part numbers
Hydraulic Gear Twin Pump - HT10-B. Stocked locally in Derwent Park, Tasmania.
Not sure it is the right part? Send us a photo of the part or your machine's serial plate and we will confirm the match before you order. Ask about fitment
Part details
| Our SKU | AM-PRT-GEN-TGP-HT10B |
|---|---|
| System | Hydraulics & Fluid Power |
Replacement dual-section (twin) hydraulic gear pump to suit the Hightop HT10-B mini excavator and compatible compact excavators. Delivers primary and pilot-circuit hydraulic power for all machine functions.
Specifications
- Type: Tandem (dual-section) external spur gear pump
- Primary Displacement: 10–12 cc/rev
- Secondary (Pilot) Displacement: 4–5 cc/rev
- Max Operating Pressure: 16 MPa (160 bar)
- Primary Flow: 24–30 L/min @ 2000 rpm, rated pressure
- Pilot Flow: 8–10 L/min @ 2000 rpm, rated pressure
- Connection Ports: SAE flange (ISO 4401-05)
- Rotation: Clockwise (SAE standard)
- Relief Valve: Integrated or remote-mounted
Compatibility
Primary Fit: Hightop HT10-B mini excavator
Cross-Compatibility: Other compact excavators (0.8T–1.5T class) using dual-pump tandem configurations with 16 MPa system pressure
Verify Fitment: Contact sales@affordablemachinery.com.au with machine model for exact compatibility confirmation
Function
- Primary Section: High-pressure flow for boom, arm, bucket hydraulic cylinders
- Secondary (Pilot) Section: Low-pressure flow for proportional control valve pilot circuits
- Dual Design: Ensures responsive machine control across all functions
Installation Notes
- Drain and flush entire hydraulic system with clean ISO VG 46 fluid before installation
- Prime new pump with fresh hydraulic fluid (prevents cavitation damage)
- Verify SAE flange coupling alignment with engine crankshaft (critical for smooth operation)
- Install new input shaft seal and output port gaskets (included with replacement kit)
- Set system relief valve to 16 MPa (use calibrated pressure gauge)
- Bleed air from pump housing and all hydraulic circuits after connection
- Run engine at idle for 3–5 minutes before applying load (allows pressure to stabilize)
- Full load test after warm-up (verify steady pressure, listen for grinding noises)
Maintenance
- Hydraulic Fluid Change: Every 500 operating hours
- Fluid Filter Replacement: Every 250 hours (sooner in dusty environments)
- Pressure Check: Every 100 hours under load (should hold 16 MPa steady)
- Noise Monitoring: Listen monthly for grinding (sign of internal wear or air)
- Seal Inspection: Check input shaft seal quarterly for slow oil weeping
Warranty & Support
- Warranty: 12 months from purchase (manufacturing defects and parts)
- Technical Support: Contact sales@affordablemachinery.com.au for installation assistance
Parts and filters ship Australia-wide. Freight is calculated at checkout from size and weight. Bulky items such as engines, cylinders, tracks and hydraulic motors are click-and-collect from Derwent Park at checkout; ask us for a freight quote if you cannot collect.
Free pickup from Derwent Park. We hold stock locally rather than drop-shipping from overseas, so most parts leave the same week.
How do I know this part fits my machine?
Every listing states the machine or engine it suits. If you are unsure, send us a photo of the part or your machine's serial plate and we will confirm the match before you order.
Which engine does my machine run?
The KOOP KD192F and Laidong KM385 are the engines fitted across the AM10, AM12 and AM16 machines. A photo of the serial plate is the quickest way to confirm which one you have.
Are wear parts covered by warranty?
Wear parts such as teeth, pins, bushings and cutting edges are excluded from warranty by nature, so we keep them stocked and priced to be replaced rather than nursed.
Do you stock this locally?
We hold stock in Derwent Park, Tasmania, rather than drop-shipping from overseas, so most parts leave the same week.