
Laidong KM385 Diesel Engine
*Estimate only: 5 years, 10% deposit, 9.5% p.a. Not a quote or an offer of finance. We introduce you to Quest Finance, an independent provider.
Fitment and part numbers
Laidong KM385 Diesel Engine suits the AM16 1.6T Mini Excavator (Laidong KM385 engine). Stocked locally in Derwent Park, Tasmania.
Not sure it is the right part? Send us a photo of the part or your machine's serial plate and we will confirm the match before you order. Ask about fitment
Part details
| Our SKU | AM-PRT-AM16-ENG |
|---|---|
| System | Engine & Internal Components |
Replacement Laidong KM385 3-cylinder diesel engine to suit our AM16 mini excavator, which is fitted with this engine model. Water-cooled, built for demanding excavation work.
Engine Specifications
- Type: 3-cylinder, 4-stroke, water-cooled diesel
- Power Output: 11.8 kW (16 hp) @ 2800 rpm
- Torque: 36 Nm @ 2000 rpm
- Bore × Stroke: 74 × 74 mm
- Compression Ratio: 17:1
- Fuel Consumption: Approx. 2.5–3.0 L/hour at rated load
- Starting Method: Electric starter, 12V DC (glow-plug assisted)
- Cooling System: Water-cooled with thermostat, radiator and fan
Compatibility
- Fits: AM16 1.6T mini excavator (direct replacement)
- Also Compatible: Other 1.6T–1.8T mini excavators using KM385 engines
- Installation: Bolt-on replacement (mounts and bracket alignment same as original)
Advantages Over Single-Cylinder
- Smooth Operation: 3-cylinder design delivers consistent power with minimal vibration
- Fuel Efficiency: Better load distribution, optimized combustion chambers
- Durability: Water cooling extends engine life under continuous duty
- Cold Starting: Glow-plug system ensures reliable cold-weather starts
Maintenance Schedule
- Oil & Filter Change: Every 250 operating hours or 6 months
- Coolant Flush: Every 500 hours or annually (check level every 100 hours)
- Air Filter Replacement: Every 250 hours (150 hours in dusty environments)
- Fuel Filter Replacement: Every 250 hours
- Glow Plug Service: Every 500–1000 hours (or if hard cold starts)
- Full Service Inspection: Every 500 hours (valves, seals, fuel injectors)
Warranty & Support
- Warranty: 12 months from purchase (parts and manufacturing defects)
- Technical Support: sales@affordablemachinery.com.au for installation & troubleshooting
Installation Notes
- Drain all fluids (oil, coolant, fuel) from old engine before removal
- Flush cooling system of old engine residue
- Inspect engine mounts and alignment before installation
- Use new gaskets, seals, and coolant hoses
- Fill with recommended coolant (50/50 antifreeze + distilled water)
- Prime fuel system, bleed air before starting
- Break-in: Run at half-throttle for first 10 operating hours
- First oil & coolant check at 50 hours
Parts and filters ship Australia-wide. Freight is calculated at checkout from size and weight. Bulky items such as engines, cylinders, tracks and hydraulic motors are click-and-collect from Derwent Park at checkout; ask us for a freight quote if you cannot collect.
Free pickup from Derwent Park. We hold stock locally rather than drop-shipping from overseas, so most parts leave the same week.
How do I know this part fits my machine?
Every listing states the machine or engine it suits. If you are unsure, send us a photo of the part or your machine's serial plate and we will confirm the match before you order.
Which engine does my machine run?
The KOOP KD192F and Laidong KM385 are the engines fitted across the AM10, AM12 and AM16 machines. A photo of the serial plate is the quickest way to confirm which one you have.
Are wear parts covered by warranty?
Wear parts such as teeth, pins, bushings and cutting edges are excluded from warranty by nature, so we keep them stocked and priced to be replaced rather than nursed.
Do you stock this locally?
We hold stock in Derwent Park, Tasmania, rather than drop-shipping from overseas, so most parts leave the same week.