Fitment and part numbers
Dozer Hydraulic Cylinder - AM16 suits the AM16 1.6T Mini Excavator (Laidong KM385 engine). Stocked locally in Derwent Park, Tasmania.
Not sure it is the right part? Send us a photo of the part or your machine's serial plate and we will confirm the match before you order. Ask about fitment
Part details
| Our SKU | AM-PRT-AM16-CYL |
|---|---|
| System | Cylinders & Actuation |
Genuine replacement hydraulic cylinder for the front dozer blade (leveling blade) on AM16 mini excavators. Controls blade lift/lower and fine grading operations.
Specifications
- Application: Dozer blade tilt/lift cylinder
- Bore Diameter: 50mm
- Rod Diameter: 32mm
- Stroke Length: 300mm
- Max Operating Pressure: 16 MPa (160 bar)
- Flow Rating: 18 L/min at rated pressure
- Connection Ports: SAE flange (ISO 4401)
- Seal Type: PTFE rod seals, nitrile o-rings
Compatibility
Fits: AM16 1.6T mini excavator with Laidong KM385 engine (3-cylinder diesel)
System Pressure: 16 MPa hydraulic system
Note: Not compatible with AM10 or AM12 models.
Features
- Supports full-width blade (typically 1,200–1,500mm)
- Proportional flow control for precise blade positioning
- Rated for continuous grading duty cycles
Installation Notes
- System pressure check before installation (should be 16 MPa)
- Flush new cylinder with clean hydraulic fluid before connecting
- Inspect hose fittings and seals — replace if worn or damaged
- Bleed air from cylinder after installation
- Test blade lift/lower through full stroke under light load
Australia-wide delivery available. Freight is calculated at checkout from size and weight.
Parts and filters ship Australia-wide. Freight is calculated at checkout from size and weight. Bulky items such as engines, cylinders, tracks and hydraulic motors are click-and-collect from Derwent Park at checkout; ask us for a freight quote if you cannot collect.
Free pickup from Derwent Park. We hold stock locally rather than drop-shipping from overseas, so most parts leave the same week.
How do I know this part fits my machine?
Every listing states the machine or engine it suits. If you are unsure, send us a photo of the part or your machine's serial plate and we will confirm the match before you order.
Which engine does my machine run?
The KOOP KD192F and Laidong KM385 are the engines fitted across the AM10, AM12 and AM16 machines. A photo of the serial plate is the quickest way to confirm which one you have.
Are wear parts covered by warranty?
Wear parts such as teeth, pins, bushings and cutting edges are excluded from warranty by nature, so we keep them stocked and priced to be replaced rather than nursed.
Do you stock this locally?
We hold stock in Derwent Park, Tasmania, rather than drop-shipping from overseas, so most parts leave the same week.